/ Blog
Home Blog Contact Buddy Ads Builder Audit Engine

What is your preferred Google Ads structure?

Bidding & Smart Bidding

The preferred Google Ads structure in 2025 consolidates campaigns around bidding logic, not keyword granularity. Segment campaigns only when they need a different budget, conversion goal, or CPA/ROAS target. Inside campaigns, use semantic ad groups of 5–15 closely related keywords. Let Smart Bidding do the heavy lifting — but only after each campaign has enough conversion volume to leave the learning phase.

Key takeaways

  • Segment campaigns only when you need genuinely different budgets, conversion goals, or bid targets — not for the sake of control.
  • Smart Bidding learns at the campaign level, so fragmented structures starve the algorithm; aim for 30–50 conversions per campaign per month at minimum, and 100+ for consistent performance.
  • Replace SKAGs with semantic ad groups of 5–15 closely related keywords and at least 2–3 RSAs per group with distinct messaging angles.
  • Run Performance Max alongside Search campaigns rather than as a replacement, and segment asset groups by product category or audience — never dump an entire catalog into one asset group.
  • Start new campaigns on Maximize Conversions (no target constraint) for 4–6 weeks before tightening to a Target CPA or Target ROAS.
Key terms
Smart Bidding
Google's suite of automated bid strategies that use machine learning to optimize bids at auction time toward a conversion goal such as Target CPA or Target ROAS.
Learning phase
The period after a campaign change during which Google's algorithms gather data before bid optimization stabilizes, typically up to two weeks.
Semantic ad group
An ad group containing 5–15 keywords that share closely related user intent, replacing the older SKAG model of one keyword per ad group.
Portfolio bid strategy
A shared bid strategy applied across multiple campaigns that pools their combined conversion signals to power Smart Bidding when individual campaigns lack sufficient volume.
Asset group
The unit within a Performance Max campaign where you organize creative assets, audience signals, and product feeds — equivalent to an ad group in Search campaigns.
---

Why does campaign structure matter so much for Smart Bidding?

Campaign structure directly controls how much data Google's Smart Bidding algorithms receive — and those algorithms learn at the campaign level, not the account level. [1] A structure with 12 campaigns averaging 8 conversions each will dramatically underperform one with 4 campaigns averaging 24 conversions each, even with identical total spend and conversion volume. The math is unforgiving: Target CPA and Target ROAS bidding require a minimum of 30–50 conversions per campaign per month just to exit the learning phase reliably, and 100+ to perform consistently. [2]

This is the central reason the 2017-era SKAG (Single Keyword Ad Group) model has become a liability. Hyper-granular structures that made sense for manual CPC actively hurt performance today by fragmenting conversion signals. If you want to understand how automation has changed the fundamentals, the full bidding & Smart Bidding reference covers the mechanics in detail.

Key Insight: Smart Bidding algorithms learn at the campaign level. Never segment more than your conversion volume can support — campaigns with <30 conversions per month should be consolidated or placed on Maximize Conversions with no target constraint.
---

How should you decide when to split campaigns?

Split into separate campaigns only when two segments genuinely require different budgets, conversion goals, or bid targets. If neither condition applies, those segments almost certainly belong in the same campaign. This question came up repeatedly in a r/PPC community thread on preferred structures, and practitioners who have consolidated aggressively tend to report better algorithmic performance.

Valid reasons to create a separate campaign:

Common Mistake: Splitting campaigns by match type or by individual keywords is a holdover from the manual CPC era. In accounts I manage, consolidating 20 fragmented campaigns down to 4–5 almost always unlocks better algorithmic performance within a few weeks.
---

What is the right ad group structure inside a campaign?

Inside each campaign, use semantic ad groups — tightly themed clusters of 5–15 keywords that share genuine intent overlap — rather than one keyword per ad group. [4] For example, a cybersecurity client might group "endpoint security software," "endpoint protection platform," and "endpoint detection and response" in a single ad group because they describe the same solution to the same buyer. This gives Smart Bidding enough signal density while still allowing meaningful ad copy customization.

For a deeper look at how to plan this out, see the guide on how to properly structure a search campaign.

Ad group sizing guidelines

Match type philosophy

Broad match modifier was retired in 2021. The current match type hierarchy for most accounts is:

Common Mistake: Running all three match types for the same keyword in the same campaign creates internal auction competition and muddies performance data. If you are using broad match with Smart Bidding, phrase match duplicates are usually redundant and can split your conversion signals. [6]
---

How few campaigns is too few — what does consolidation actually look like?

The right number of campaigns depends on your spend level and conversion volume, not on a preference for control. The table below reflects structures I apply across account tiers in practice:

Structure type Best for Conversion volume needed Management overhead
1–2 campaigns Smaller accounts (<$10K/mo), early-stage businesses 30+ total/month minimum Low — let the algorithm decide
2–4 campaigns Mid-market accounts ($10K–$100K/mo), multiple product lines 50+ per campaign/month Medium
5–10 campaigns Enterprise accounts ($100K+/mo), distinct business units 100+ per campaign/month ideal High — data must justify the split
10+ campaigns Multi-location, multi-brand, or agency portfolio management Requires portfolio bid strategies Very high management overhead

For accounts in the $5K–$30K/month range that cannot consolidate enough to hit per-campaign minimums, portfolio bid strategies are an underused solution — they pool conversion signals across multiple campaigns without forcing a full structural merger. This is often the best middle ground before full consolidation is feasible. For more on managing spend at different tiers, the budgeting in Google Ads guide is worth reading alongside this.

---

Where does Performance Max fit in your campaign structure?

Performance Max should run alongside Search campaigns as a complement, not replace them. [7] Search campaigns take priority over PMax when the same query could be served by either — meaning your Search campaigns act as a guardrail that protects your highest-value search terms.

When PMax works well

A typical structure running PMax alongside Search

Common Mistake: Creating a single PMax campaign for an entire e-commerce catalog with 500+ products and one generic asset group. Asset groups are your primary lever for relevance inside PMax — segment them by product category, margin tier, or audience intent. [7]
Key Insight: Note that Discovery campaigns were upgraded to Demand Gen. If your account still references Discovery campaigns, those have been migrated and you should manage them through the Demand Gen campaign type.
---

How should bid strategy align with campaign structure?

Bid strategy and structure are two sides of the same coin — you cannot evaluate one without the other. The current bidding ladder is Manual CPC → Maximize Conversions → Maximize Conversions with a Target CPA (or Maximize Conversion Value with a Target ROAS). Note that Enhanced CPC was retired for Search and Display campaigns in 2025 and is no longer available. [1]

Matching bid strategy to data volume

Best Practice: When launching a new campaign, start on Maximize Conversions (no target) for 4–6 weeks. Once you have 50–100 conversions, transition to Target CPA set roughly 20–30% above your current observed CPA. Tighten the target no more than 10–15% at a time — aggressive targets imposed from day one routinely trigger a prolonged learning phase.
---

What structural templates work for lead gen and e-commerce accounts?

Lead generation account ($15K–$50K/month)

If you are earlier in your Google Ads journey, the beginner Google Ads strategy guide provides useful context before applying these templates.

E-commerce account ($50K–$200K/month)

For more on building effective RSA assets within these structures, see the guide on ideal Google Ads RSA structure. [9]

---

What to do next

  1. Audit your conversion volume per campaign. Pull a 90-day report. Flag every campaign with fewer than 30 conversions — each one is a consolidation candidate or a bid-strategy mismatch. Use the 250-point Google Ads audit engine to surface structural issues quickly.
  2. Justify every campaign split you currently have. For each campaign, ask: does this segment require a different budget, a different conversion goal, or a materially different CPA/ROAS target? If the answer to all three is no, merge it.
  3. Align bid strategies to your data volume. Any campaign running Target CPA or Target ROAS with <30 conversions/month should be switched to Maximize Conversions immediately — most accounts see performance improvement within 2–3 weeks.
  4. Audit your PMax asset groups. Confirm you have at least one asset group per major product category or audience segment. Generic single-asset-group PMax campaigns are one of the most common missed optimization opportunities in e-commerce accounts.
  5. Implement portfolio bid strategies for underpowered campaigns rather than forcing everything into a single campaign. This pools algorithmic signal while preserving structural control — the right tool for mid-sized accounts that cannot yet meet per-campaign conversion thresholds.
---

Frequently asked questions

Is one campaign per account ever the right answer?

For very small accounts spending under $10K/month with a single product or service, a single non-brand Search campaign plus a separate brand campaign is often the best structure. With limited conversion volume, any additional splits starve Smart Bidding of the data it needs. Add campaigns only when spend and conversion volume grow to justify them.

Should I still use SKAGs in 2025?

No. Single Keyword Ad Groups were designed for manual CPC bidding where granular control was the primary lever. With Smart Bidding, fragmenting keywords into individual ad groups dilutes the conversion signals each ad group and campaign receives. Semantic ad groups of 5–15 closely related keywords deliver better performance while still allowing meaningful ad copy customization. [4]

Can Performance Max replace Search campaigns entirely?

In practice, no — at least not for most accounts. Search campaigns take priority over PMax for matching queries, so maintaining Search campaigns protects your highest-value, highest-intent traffic. PMax is best used to cover inventory Search cannot reach: Shopping, YouTube, Display, and Gmail. [7] Removing Search entirely hands Google complete control over query matching with no guardrails.

How long does it take Smart Bidding to exit the learning phase?

Google's learning phase typically lasts up to 2 weeks after a significant campaign change. [1] The speed of exit depends heavily on conversion volume — campaigns generating 50+ conversions per month tend to stabilize faster than those near the 30-conversion floor. Avoid making major structural or target changes during the learning phase, as each change can reset it.

What happened to Enhanced CPC — should I still use it?

Enhanced CPC (eCPC) was retired for Search and Display campaigns in 2025 and is no longer available as a bid strategy option. The current ladder for Search is Manual CPC → Maximize Conversions → Maximize Conversions with a Target CPA. If any of your campaigns were using eCPC, they will have been migrated — verify your current bid strategy settings in the campaign settings panel.

How do I structure an account when I am just getting started with no conversion history?

Start with the minimum viable structure: one brand campaign and one non-brand Search campaign, both on Maximize Conversions with no target constraint. Focus on getting clean conversion tracking in place first — without reliable conversion data, any bid strategy is operating blind. Once you have 50–100 conversions recorded, you have enough data to consider adding Target CPA and evaluating whether additional campaign splits are warranted. [10]

References

  1. Google Ads Help. “About Smart Bidding.” Accessed Nov 7, 2026.
  2. Google Ads Help. “About Target CPA bidding.” Accessed Nov 7, 2026.
  3. Google Ads Help. “About average daily budgets.” Accessed Nov 7, 2026.
  4. Google Ads Help. “Organize your account with ad groups.” Accessed Nov 7, 2026.
  5. Google Ads Help. “About responsive search ads.” Accessed Nov 7, 2026.
  6. Google Ads Help. “About keyword matching options.” Accessed Nov 7, 2026.
  7. Google Ads Help. “About Performance Max campaigns.” Accessed Nov 7, 2026.
  8. Google Ads Help. “About Target ROAS bidding.” Accessed Nov 7, 2026.
  9. Google Ads Help. “Best practices for creating effective responsive search ads.” Accessed Nov 7, 2026.
  10. Google Ads Help. “About conversion measurement.” Accessed Nov 7, 2026.
  11. Original community discussion: r/PPC thread on Reddit.

Related Reading

AI Disclosure: This article was generated with AI assistance based on a community discussion on Reddit r/PPC. Expert analysis and practitioner perspective by John Williams, Founder, AHMEEGO · Google Ads Practitioner with $350M+ in managed Google Ads spend. AI was used to draft and structure the content; all strategic recommendations reflect real campaign experience.