/ Blog
Home Blog Contact Buddy Ads Builder Audit Engine

Is Google's Quality Score completely effed?

Google Ads Strategy

Quality Score is not broken — it is a diagnostic tool, not a performance metric, and that distinction is where most practitioners go wrong. The 1–10 keyword-level score reflects historical averages across queries, devices, and times of day. Ad Rank, which actually determines your position and CPC, is calculated in real time using far more granular signals that the dashboard score never captures.

Key takeaways

  • Quality Score is a lagging, keyword-level diagnostic; Ad Rank is what actually governs your auction position and CPC in real time.
  • Optimizing for aggregate Quality Score as a KPI is a distraction — weight it by spend, use component breakdowns, and track it quarterly at most.
  • A keyword with QS 5 can consistently outperform a QS 9 keyword in conversions if its real-time auction signals — intent, device, audience, landing page — are stronger.
  • The three components (eCTR, Ad Relevance, Landing Page Experience) are genuinely useful triage signals when applied to your highest-spend keywords, not your full keyword list.
  • Never pause a keyword for low Quality Score without first checking its 90-day conversion data — low QS and strong CPA can coexist.
Key terms
Quality Score
A 1–10 keyword-level diagnostic rating Google assigns based on expected CTR, ad relevance, and landing page experience — it is not a live auction signal.
Ad Rank
The real-time score Google calculates for every auction to determine your ad position and CPC, using signals more granular than the dashboard Quality Score.
Expected Click-Through Rate (eCTR)
A Quality Score component that compares how likely your ad is to be clicked against other ads targeting similar keywords, normalized for position.
Landing Page Experience
A Quality Score component rating how relevant, fast, and mobile-friendly your destination page is relative to the searcher's intent.
Impression Share Lost to Rank
The percentage of auctions where your ad did not show because your Ad Rank was too low — a more actionable metric than average Quality Score for diagnosing auction competitiveness.
---

What is Quality Score and what does it actually measure?

Quality Score is a 1–10 diagnostic rating assigned at the keyword level that estimates how relevant your ads and landing pages are to a searcher — it is not a live auction signal. [1] Google evaluates three components: Expected Click-Through Rate (eCTR), Ad Relevance, and Landing Page Experience, each rated "Below Average," "Average," or "Above Average." [1] The number you see in the dashboard is an aggregated, historical average across all queries, devices, times of day, and audience segments that have matched that keyword.

Key Insight: Quality Score is a snapshot of historical averages. Your actual Ad Rank quality in any given auction can differ significantly from this aggregate — which is why a QS 6 keyword can routinely outbid a competitor's QS 9 keyword in live auctions.

How Quality Score differs from Ad Rank

Ad Rank determines your actual auction position and the CPC you pay. [2] It is recalculated in real time for every auction using signals that the keyword-level Quality Score does not capture: the user's device and location at query time, the specific search query matching your keyword, time-of-day context, audience list membership, and auction-specific landing page signals. [2] Quality Score is an imperfect, delayed proxy for one input into that calculation — not the calculation itself.

---

Are the three Quality Score components worth paying attention to?

Yes — but only for keywords that actually drive meaningful spend, and only as a triage filter rather than an optimization target. Here is what each component is genuinely telling you.

Expected Click-Through Rate (eCTR)

eCTR compares your keyword's expected CTR against all other advertisers targeting similar keywords, normalized for ad position. [1] A "Below Average" rating is the most actionable of the three — it almost always means your ad copy is not resonating with searcher intent for that keyword. In accounts I manage, eCTR problems are fixable at the ad group and copy level faster than any other component. For branded terms, CTRs of 15–40%+ routinely produce "Above Average" ratings; for competitive non-branded commercial keywords, "Average" eCTR can correspond to actual CTRs as low as 2–5% because the comparison is relative to the competitive landscape for that keyword cluster.

Ad Relevance

Ad Relevance measures how closely your ad copy aligns with the searcher's query intent. [1] With Responsive Search Ads (RSAs) now the only ad format available for Search campaigns, Google's machine learning serves different headline and description combinations to different users, so this score is an averaged assessment across potentially thousands of asset combinations. [3] "Below Average" Ad Relevance in 2025 typically signals one of two problems: your RSA is covering semantically different intents across too many keywords in a single ad group, or a legacy keyword has drifted from your current ad copy themes.

Best Practice: When Ad Relevance is "Below Average," tighten ad group themes rather than stuffing keywords into headlines. Add two or three explicit keyword-theme headlines inside the RSA and check asset performance ratings for underperforming assets. [4]

Landing Page Experience

Landing Page Experience is where I see the most untapped improvement potential in accounts I audit. "Below Average" means Google's assessment is that your destination is slow, not mobile-optimized, has thin content relative to the keyword's implied intent, or produces high bounce rates relative to the query type. [1] Core Web Vitals are influential here — in accounts I manage, improving Largest Contentful Paint (LCP) from 4.5 seconds to under 2.5 seconds has produced a full Quality Score point gain on key terms. Landing page changes typically take 4–6 weeks to fully reflect in Quality Score, so set a 30-day checkpoint after any site speed fix before drawing conclusions.

---

Why does Quality Score feel disconnected from real campaign performance?

The frustration this question generated in the r/PPC community is legitimate — the disconnect is real, and it comes from structural changes in Google Ads over the past several years. Quality Score feeling "broken" is also a common theme when practitioners ask whether Quality Score is a scam or distraction.

Smart bidding has changed what Quality Score controls

When Search campaigns ran mostly on Manual CPC bidding, Quality Score had a more visible and direct relationship with CPCs and position — higher QS meant lower CPC for similar position, and practitioners could observe the relationship clearly. With Maximize Conversions and Maximize Conversion Value (with optional Target CPA or Target ROAS goals) now dominating spend allocation, Quality Score's influence on individual auction outcomes is increasingly mediated by Google's real-time auction quality assessment, which is not visible in the dashboard. [5] A keyword sitting at QS 5 can be consistently scored highly in real auctions because actual user signals — intent, device, audience, query specificity — align well with your landing page and historical conversion data.

RSAs changed how Ad Relevance is calculated

Expanded Text Ads allowed practitioners to engineer ad copy specifically around keyword insertion and see Quality Score movement within days. With RSAs as the only Search ad format, [3] the Ad Relevance component reflects an average across all asset combinations Google is testing — making it a rougher, slower-moving signal than it was under ETAs.

New and low-volume keywords produce unstable scores

Quality Score initializes at 6 for new keywords and calibrates based on auction history. [1] For keywords generating fewer than a few hundred impressions per month, the score can remain statistically unreliable for months. In accounts I manage, new competitor-targeting keywords at QS 4 have outperformed established terms at QS 8 on conversion cost — because the landing page and real-time auction quality were superior despite the lagging diagnostic score.

Common Mistake: Pausing or removing keywords because their Quality Score is below 5 without checking conversion data first. I have audited accounts where entire ad groups of "low QS" keywords were paused despite generating conversions at or below target CPA — the account manager conflated a diagnostic number with a performance verdict.
---

When does Quality Score actually matter — and when can you ignore it?

Quality Score has varying relevance depending on your bidding strategy and campaign context. Use this as a rough guide:

Scenario QS Relevance What to focus on instead
Manual CPC campaigns, competitive SERP High — QS directly affects CPC at a given position Improve eCTR through ad copy testing
Smart bidding (Maximize Conversions / Maximize Conversion Value) Low — real-time signals dominate auction quality Conversion volume, CPA trends, ROAS
New account or new ad group Medium — early structural signal Ad group theme tightness, landing page speed
Budget-constrained campaigns Medium — affects impression share efficiency Impression Share Lost to Rank
Branded keywords Low — you should dominate by default Branded search volume trends, competitor activity
Competitive B2B keywords at $50–$200+ CPCs Medium-High — CPC efficiency matters significantly Landing page conversion rate, QS component breakdown

If you are seeing a low Quality Score alongside a high conversion rate, that is not a problem to fix — it is evidence that the diagnostic score is not capturing what the real-time auction already knows about your keyword's performance.

---

How should you use Quality Score data productively in account audits?

The right framework treats Quality Score as a diagnostic filter applied to spend-weighted keywords, not a dashboard metric to track weekly. Here is the process I use in account audits.

  1. Segment by spend weight. Export keywords sorted by cost and isolate the terms representing 80% of your spend. A QS 4 on a keyword spending $5/month is irrelevant noise. A QS 4 on a keyword spending $5,000/month warrants investigation.
  2. Cross-reference with conversion data. For every high-spend keyword with QS <6, check actual CPA and ROAS against campaign targets. If performance is at or above target, note it and move on — the diagnostic number does not override real conversion data. See also the broader discussion on whether Quality Score reality matters.
  3. Use component breakdown to diagnose root cause.
    • eCTR Below Average: Test new ad copy angles; audit RSA asset performance ratings and replace "Low" rated headlines and descriptions; ensure your call-to-action matches the query's commercial intent stage.
    • Ad Relevance Below Average: Tighten ad group themes; if one RSA is serving 50+ semantically diverse keywords, split it; add keyword-theme headlines explicitly in two or three assets.
    • Landing Page Experience Below Average: Run your URL through PageSpeed Insights; check mobile usability in Search Console; verify that landing page content directly addresses the keyword's implied intent. [6]
  4. Track improvement over 30–60 day windows. Quality Score changes slowly — particularly Landing Page Experience improvements after a site speed fix. Use the "Quality Score (hist.)" and component history columns in Google Ads to track trends rather than point-in-time snapshots. A keyword trending from QS 5 to QS 7 over 60 days is meaningful signal; a single-day QS 5 reading alone tells you very little.
Best Practice: Use Quality Score as a quarterly health check on your spend-weighted keyword set, not a weekly optimization lever. This extracts the diagnostic value without letting the number distract you from conversion volume, CPA, and ROAS — the metrics that actually reflect business outcomes.
---

Why is reporting "average Quality Score" at the account level misleading?

Rolling Quality Score into an account-level average and reporting it as a KPI is one of the most persistent bad habits in agency reporting — and it actively misleads stakeholders. Here is why the number is structurally dishonest as an aggregate:

Key Insight: If you must report Quality Score to stakeholders, weight it by impressions or spend and report component-level breakdowns separately. Better still, replace it with Impression Share Lost to Rank, average CPC trends for core keywords, and landing page conversion rate — metrics that predict business outcomes rather than approximate diagnostic health.

If you are stuck trying to improve Quality Score and not seeing movement, verify first whether the keywords in question are driving real conversions — because a stuck diagnostic score on a performing keyword is not actually a problem worth solving.

---

What to do next

  1. Audit your reporting immediately. Remove "Average Quality Score" as a headline KPI from client or internal reports. Replace it with Impression Share Lost to Rank, CPA trends, and ROAS for your core keyword set.
  2. Run a component breakdown on your top 20 spend keywords. Export your keyword list sorted by cost descending and review the three QS component ratings for your top 20 terms — these are the only Quality Score data points that materially affect your account economics.
  3. Prioritize landing page speed for any "Below Average" Landing Page Experience keywords. Test your top landing page URLs through PageSpeed Insights. Target LCP <2.5 seconds and CLS <0.1 — improvements compound across both paid and organic performance simultaneously.
  4. Stop pausing keywords based on Quality Score alone. Before pausing any keyword for low QS, review 90-day conversion data. If it is converting at or below your target CPA, keep it active. Pause only when both conversion data and QS signal a problem.
  5. Run a full structural audit if you suspect deeper issues. Component ratings are a starting point, not a complete account diagnosis. Use the 250-point Google Ads audit engine to surface structural problems beyond what Quality Score can flag.
---

Frequently asked questions

Does a low Quality Score directly raise my CPCs?

On Manual CPC campaigns, yes — Ad Rank incorporates Quality Score, so a lower score means you pay more for a given position than a competitor with a higher score and the same bid. On smart bidding strategies like Maximize Conversions or Maximize Conversion Value, the relationship is less direct because Google's real-time auction quality assessment — not the dashboard QS — drives most of the auction outcome. [2]

Is a Quality Score of 7 out of 10 considered good?

It depends on the keyword type and competitive context. For non-branded commercial keywords, QS 7 generally indicates above-average ad relevance and landing page alignment and is a reasonable benchmark. For branded terms, anything below 8–9 warrants investigation because you should have a structural advantage on your own brand queries. See the deeper breakdown on what a 7/10 Quality Score means in practice.

How long does it take for landing page improvements to show up in Quality Score?

In accounts I manage, landing page changes typically take 4–6 weeks to fully reflect in the Landing Page Experience component, and an additional 1–2 weeks for that to shift the aggregate Quality Score. Site speed improvements (reducing LCP, fixing CLS) tend to register faster than content changes. Use the historical Quality Score columns in Google Ads to track the trend rather than checking the score on a fixed date.

Should I delete keywords with Quality Score below 5?

Not without checking conversion data first. A keyword with QS 4 that generates conversions at or below your target CPA should stay active — the diagnostic score does not override real performance. If a keyword has both low QS and poor conversion data over 90 days, then pausing or removing it is justified. The conversion evidence is what should drive that decision, not the score alone. [1]

Does Quality Score affect Performance Max campaigns?

Performance Max campaigns do not have keyword-level Quality Scores — the format does not expose individual keywords in the same way. [7] Quality Score is a Search campaign concept tied to keyword-level bidding. For PMax, the equivalent health signals are asset group performance ratings, audience signal strength, and the asset-level "Learning" or "Limited" status indicators in the campaign dashboard.

Is it worth creating separate ad groups just to improve Quality Score?

Only if the restructure reflects genuine semantic differences in searcher intent — not to game the QS number. Splitting ad groups solely to tighten keyword-to-ad-copy matching can improve Ad Relevance and eCTR components, which is worthwhile. But splitting for splitting's sake fragments your conversion data, which undermines smart bidding performance. The structure should serve intent segmentation first; Quality Score improvement is a byproduct, not the goal. [4]

References

  1. Google Ads Help. “About Quality Score for Search campaigns.” Accessed Nov 14, 2026.
  2. Google Ads Help. “About Ad Rank.” Accessed Nov 14, 2026.
  3. Google Ads Help. “About responsive search ads.” Accessed Nov 14, 2026.
  4. Google Ads Help. “Best practices for creating effective responsive search ads.” Accessed Nov 14, 2026.
  5. Google Ads Help. “Determine a bid strategy based on your goals.” Accessed Nov 14, 2026.
  6. Wikipedia. “Conversion rate optimization.” Accessed Nov 14, 2026.
  7. Wikipedia. “Google Ads.” Accessed Nov 14, 2026.
  8. Original community discussion: r/PPC thread on Reddit.

Related Reading

AI Disclosure: This article was generated with AI assistance based on a community discussion on Reddit r/PPC. Expert analysis and practitioner perspective by John Williams, Founder, AHMEEGO · Google Ads Practitioner with $350M+ in managed Google Ads spend. AI was used to draft and structure the content; all strategic recommendations reflect real campaign experience.