/ Blog
Home Blog Contact Buddy Ads Builder Audit Engine

I cannot use Google Ads - what am I doing wrong?

Google Ads Strategy

Google Ads accounts fail to serve for three predictable reasons: unresolved identity or advertiser verification, a billing setup problem, or ad disapprovals — often all three at once. Check your account notifications bell first, confirm your payment method is active and matches your billing country, then audit every ad for disapprovals. Fix these in order before touching any campaign settings.

Key takeaways

  • Verification and billing are hard gates — campaigns show "Eligible" but serve zero impressions until both are cleared.
  • The notifications bell (top right in the UI) and Policy Manager surface the actual blockers; check these before anything else.
  • Billing country and currency are permanent account settings; a mismatch requires a new account, not a support call.
  • When every ad in an ad group is disapproved, the entire ad group goes dark with no warning at the campaign level.
  • New accounts with no conversion history should start on Maximize Clicks, not Target CPA or Target ROAS, which need data to function.
Key terms
Advertiser Verification
A Google requirement for new and some existing accounts to confirm legal business name, country of domicile, and the nature of products or services being advertised before ads can serve.
Identity Verification
A separate Google process that confirms who you are as an individual, distinct from advertiser verification, which covers your business.
Quality Score
Google's keyword-level rating (1–10) of your ad relevance, expected click-through rate, and landing page experience — low scores make it prohibitively expensive to win auctions.
Maximize Clicks
A Google Ads bidding strategy that automatically sets bids to get as many clicks as possible within your budget, requiring no prior conversion data to function.
Hard Gate
An account-level requirement (such as verification or billing confirmation) that completely blocks ad serving regardless of campaign configuration until it is resolved.
---

Why won't my Google Ads account serve any impressions?

The vast majority of "my ads aren't running" cases come down to three layers: identity or advertiser verification, a billing issue, or ad disapprovals. This question came up in the r/googleads community and the pattern is consistent — practitioners there almost always point new advertisers back to these same three blockers before anything else. Google has tightened onboarding significantly in recent years, and the platform does not always surface these blockers prominently. You can have a campaign showing "Eligible" and still serve nothing because a verification request is buried in your notifications.

Key Insight: Campaign status ("Eligible," "Active") only tells you the campaign is configured correctly. It does not confirm account-level clearance. These are independent checks.
---

How do I check whether my Google Ads account is verified?

Navigate to the notifications bell in the upper right of your Google Ads interface — this is where Google surfaces every account-level action item you must resolve before ads serve.

Look for any of the following:

Identity verification vs. advertiser verification — what's the difference?

Identity verification confirms who you are as an individual. Advertiser verification confirms your business — legal name, country of domicile, business registration, and the nature of what you're advertising. Both can be required simultaneously on a new account, and both must be cleared independently.

Google's review timeline for these submissions typically runs 3–5 business days, and in high-volume periods can reach 10 business days. There is no standard escalation path to speed this up through advertiser support.

Best Practice: Submit verification documents as completely as possible on the first attempt — have your business registration, a government-issued ID, and your business website ready before you start. Incomplete submissions restart the review clock.

If you are setting up your first account and the UI immediately pushes you into campaign creation before you're ready, see how to handle Google Ads forcing you to start a campaign on login — there is a way to skip that flow.

---

What billing problems stop Google Ads from serving?

Billing issues cause a significant share of non-serving cases, and they don't all look the same in the UI.

Issue What you see How to fix it
Card not confirmed Campaign shows "Eligible" but no impressions Go to Billing & Payments > Payment Methods and complete card verification
Prepay balance at zero Account paused with "No funds" notice Add funds under Billing & Payments > Make a Payment
Billing threshold not met Ads serving but invoices failing Confirm your payment method can cover the threshold amount
Country/currency mismatch Card declined at setup Use a payment method matching your billing country; if the account was created with the wrong country, you need a new account
Common Mistake: Creating a Google Ads account via VPN or from a different geographic location causes a billing country mismatch. Billing country and currency are permanent — they cannot be changed after account creation. If yours is wrong, create a new account rather than trying to fix the existing one through support.

For more on managing budgets after your account is live, see how to change your Google Ads account budget.

---

Why are my ads disapproved and how do I fix them?

Ad disapprovals are the second most common reason a new account won't serve, right behind verification issues. When every ad in an ad group is disapproved, that ad group serves zero impressions — Google does not flag this at the campaign level.

[1]

Industries that trigger additional review for new accounts

Certain categories require certification or additional approval before ads will serve at all:

How to handle a disapproved ad

  1. Click the disapproval reason in your Ads view — Google links directly to the specific policy violated.
  2. Read the full policy page, not just the summary; the details determine whether your content actually violates it.
  3. Edit the ad or landing page to comply, then resubmit for review.
  4. If you believe the disapproval is an error, use the Appeal option with a clear explanation.
  5. Fix any landing page issues (missing privacy policy, broken links, prohibited content) before resubmitting.
Common Mistake: Resubmitting a disapproved ad without making substantive changes flags your account for circumventing policies, which accelerates suspension. Make the actual fix or appeal with a legitimate explanation — never repeatedly resubmit identical content.
---

What campaign configuration issues silently prevent serving?

Once verification, billing, and disapprovals are cleared, several technical settings commonly block delivery without obvious error messages.

[2]

Targeting that is too narrow

Bid and budget problems

If bids or budgets are severely below auction requirements, you may technically be eligible but winning almost nothing. [4] In accounts I manage, daily budgets under $5–10 in competitive markets routinely produce near-zero impressions for most of the day. Manual CPC bids set well below the first-page bid estimate shown in Keyword Planner rarely win auctions consistently.

Bidding strategy mismatch for new accounts

Target CPA and Target ROAS (now configured as optional targets within Maximize Conversions and Maximize Conversion Value respectively) require conversion history to function correctly. [5] Applying these on a new account with fewer than 30–50 conversions in the past 30 days typically results in stalled or severely throttled delivery — the algorithm lacks the data to make predictions.

Best Practice: For a brand-new account with no conversion history, start with Maximize Clicks and a budget you can sustain for at least 2–3 weeks without changes. Once you have conversion data, move to Maximize Conversions, and only then layer in a Target CPA if the data supports it. Switching bidding strategies frequently resets Google's learning period and stalls delivery each time.

Quality Score and ad relevance

Google evaluates relevance signals continuously, and ads with very low expected click-through rates, poor ad relevance, or landing pages that don't match keyword intent produce low Quality Scores that make it practically impossible to win auctions at a reasonable bid. [1] Check your keyword-level Quality Score column — anything below 4 or 5 warrants immediate attention to ad copy and landing page alignment.

---

When should I contact Google Ads support, and how?

Google support can resolve a specific set of issues; it cannot resolve others, and knowing the difference saves significant time.

Cases where support can actually help

Cases where support typically cannot help

Use the chat option rather than calling — chat creates a written record. Come prepared with your Customer ID, the specific issue, and relevant screenshots. "My ads aren't working" gets a generic response. "My account shows advertiser verification pending since [date] and I submitted all required documentation on [date]" gets an actionable one.

If after working through all of this you're still questioning whether the platform is right for your situation, see why Google Ads genuinely doesn't work for some people — sometimes the issue is structural, not just setup.

---

What to do next

  1. Check your notifications bell immediately. Resolve every outstanding identity verification, advertiser verification, or billing confirmation request before touching any campaign setting. These are hard gates.
  2. Audit your billing setup end to end. Navigate to Billing & Payments, confirm your payment method is accepted, your billing country matches your actual location, and your balance or payment method has sufficient capacity.
  3. Filter all ads by "Disapproved" and "Under review." Fix or appeal every disapproval. No approved ads in an ad group means that ad group is completely dark.
  4. Verify your campaign configuration basics. Confirm start dates are not in the future, ad scheduling is not blocking your intended serving hours, geographic targeting is broad enough to generate real volume, and audience targeting is set to "Observation" if you want broad reach.
  5. Simplify your bidding strategy. If you have no conversion history, switch to Maximize Clicks. Hold it steady for at least 7–14 days before evaluating performance. Run a full account audit with the 250-point Google Ads audit engine once you are confirmed as serving.
---

Frequently asked questions

How long does Google Ads advertiser verification take?

Google's standard timeline is 3–5 business days after a complete submission, though it can reach 10 business days during high-volume periods. There is no standard support escalation to speed this up. If your submission has been pending for more than 10 business days, contact support with your submission date and Customer ID as evidence.

Can I change the billing country on an existing Google Ads account?

No. Billing country and currency are permanent settings set at account creation and cannot be changed afterward. If your account was created with the wrong billing country — often caused by using a VPN during setup — you will need to create a new account with the correct settings. This is a hard system limitation, not a support escalation path.

Why does my campaign show "Eligible" but still serve no impressions?

"Eligible" status only means your campaign configuration is valid — it does not confirm account-level clearance. Outstanding advertiser verification, an unconfirmed payment method, or all ads in an ad group being disapproved will each silently prevent serving while your campaign still shows "Eligible." Check account status under Tools & Settings > Setup > Account Status for account-level holds.

Should a brand-new Google Ads account use Target CPA or Target ROAS?

Not initially. Target CPA and Target ROAS are optional targets within Maximize Conversions and Maximize Conversion Value respectively, and both require sufficient conversion history — typically 30–50 conversions in the past 30 days — to function properly. A new account with no data should start with Maximize Clicks, build conversion history over several weeks, then move to Maximize Conversions before adding a CPA or ROAS target.

What happens if all ads in an ad group are disapproved?

The entire ad group stops serving — zero impressions, no activity. Google does not surface this warning at the campaign level, so your campaign can appear healthy while a whole ad group is dark. Always filter your Ads view by "Disapproved" and "Under review" statuses when troubleshooting a non-serving campaign, and ensure at least one approved, active ad exists in every ad group.

Is it normal for a new Google Ads account to be slow to spend its budget?

Yes, to a degree. Google's algorithm needs time to gather data, and a new account with no conversion history, low bids, or a very narrow audience will often underspend its budget in early weeks. If you are on a smart bidding strategy without sufficient conversion data, delivery will be severely throttled. Switching to Maximize Clicks and broadening your targeting slightly usually resolves early underspend while the account matures.

References

  1. Google Ads Help. “About Quality Score for Search campaigns.” Accessed Nov 15, 2026.
  2. Google Ads Help. “About campaign settings.” Accessed Nov 15, 2026.
  3. Google Ads Help. “About negative keywords.” Accessed Nov 15, 2026.
  4. Google Ads Help. “About Ad Rank.” Accessed Nov 15, 2026.
  5. Google Ads Help. “Determine a bid strategy based on your goals.” Accessed Nov 15, 2026.
  6. Original community discussion: r/googleads thread on Reddit.

Related Reading

AI Disclosure: This article was generated with AI assistance based on a community discussion on Reddit r/googleads. Expert analysis and practitioner perspective by John Williams, Founder, AHMEEGO · Google Ads Practitioner with $350M+ in managed Google Ads spend. AI was used to draft and structure the content; all strategic recommendations reflect real campaign experience.