/ Blog
Home Blog Contact Buddy Ads Builder Audit Engine

How do I know if I'm bidding too low on my Google ...

Bidding & Smart Bidding

Check your Search Lost Impression Share (Rank) column first — if you're losing more than 30% of eligible impressions due to Ad Rank, your bids are likely too low. Confirm with the Auction Insights report, keyword-level first-page bid estimates, and the Top vs. Other segment. For Smart Bidding campaigns, compare your Target CPA to your actual 30-day CPA; a gap of more than 20% will throttle impressions.

Key takeaways

  • Search Lost IS (Rank) above 30% is the clearest signal that your bids are too low relative to auction competition.
  • Always separate Lost IS (Rank) from Lost IS (Budget) — raising bids when budget is the constraint makes performance worse, not better.
  • Quality Score problems can mimic underbidding; a keyword at 3/10 needs roughly double the bid of a 7/10 keyword to reach the same Ad Rank.
  • Smart Bidding campaigns underbid when Target CPA or Target ROAS targets are set too aggressively relative to actual historical performance.
  • Top vs. Other segmentation reveals whether you're winning high-intent inventory or cheap, low-converting impressions.
Key terms
Ad Rank
Google's per-auction score that determines whether your ad shows and in what position, calculated from your bid, Quality Score, context, and expected impact of ad assets.
Search Lost Impression Share (Rank)
The percentage of eligible impressions you missed because your Ad Rank was too low — a direct signal that your bids or Quality Score need improvement.
Quality Score
A 1–10 diagnostic score Google assigns to each keyword reflecting expected click-through rate, ad relevance, and landing page experience, which directly affects the bid needed to reach a given Ad Rank.
Target CPA
An optional target you set inside a Maximize Conversions Smart Bidding campaign that tells the algorithm the average cost per conversion you want to achieve.
Top vs. Other segment
A Google Ads report segment that splits your impressions and clicks into those that appeared above organic search results versus all other placements, used to gauge whether your bids are winning premium inventory.
---

How do Impression Share metrics tell you whether your bids are too low?

Search Lost Impression Share (Rank) is the most direct diagnostic: it shows the percentage of auctions you lost specifically because your Ad Rank was too low, which is driven by your bid and Quality Score combined. [1] Add these three columns to your campaign and ad group views and sort by Lost IS (Rank) descending.

The three IS columns you need

Lost IS (Rank) reading Likely diagnosis First action
<10% Bids are competitive Focus on Quality Score and ad extensions
10–30% Moderate bid pressure Review Top vs. Other segment and CPC trends
30–60% Bids likely too low Raise bids 15–25% on top-converting keywords
>60% Severely underbidding Audit Quality Score first, then raise bids
Common Mistake: Conflating Lost IS (Budget) with Lost IS (Rank). If most of your lost impression share is budget-driven, raising bids accelerates budget depletion and reduces total clicks. Always split these out before acting.
---

What does Auction Insights reveal about your competitive bid position?

The Auction Insights report shows exactly who is competing against you and how your metrics compare to theirs — making it one of the most actionable free tools in Google Ads for diagnosing a bid gap. Navigate to your campaign or ad group, then click "Auction Insights."

Metrics to focus on

Best Practice: Run Auction Insights segmented by device. Mobile and desktop auctions often have different competitive dynamics, and a device bid adjustment can close a gap without changing your base bid. This question came up in the r/googleads community in the context of waterfall campaign structures — where underbidding at any tier collapses the entire priority logic.
---

How do first-page and top-of-page bid estimates help you calibrate?

Google provides keyword-level bid estimates for the approximate CPC needed to show on the first page, at the top of the page, and in the first position — these are estimates based on recent auction data, not guarantees, but they're a fast calibration check.

How to access and use them

  1. Go to your campaign → Keywords view.
  2. Click the column selector and add "Est. First Page Bid," "Est. Top of Page Bid," and "Est. First Position Bid" under Attributes.
  3. Compare your current Max CPC against these estimates for each keyword.
  4. Flag keywords where your Max CPC is more than 30% below the Est. First Page Bid and that keyword has had at least one conversion in the last 30 days. These are your priority bid-increase candidates.

In accounts I manage, keywords bidding into that dead zone — more than 40% below the first-page estimate with under 30% of target impressions — tend to win only the lowest-quality, off-peak auctions. You get impressions on paper, but they convert poorly. For guidance on bidding on competitive keywords without overspending, the approach requires being surgical rather than applying blanket increases.

Key Insight: Don't raise bids to the first-position estimate across the board. Focus increases on keywords with strong historical conversion data (at least 5–10 conversions in the last 30 days), high commercial intent, and an acceptable current CPA.
---

What does the Top vs. Other segment tell you about bid quality?

The Top vs. Other segment — Google's replacement for the retired Average Position metric — shows what percentage of your impressions and clicks are coming from above-the-fold positions versus "other" placements such as below organic results or partner sites, and it's one of the most underused diagnostics in the platform.

In a competitively-bid campaign targeting high-intent keywords, in accounts I manage I typically see more than 60% of impressions from "Top" positions on branded and bottom-funnel terms, with Top position CPCs running roughly 1.5–2.5x higher than "Other" CPCs. That premium is normal — top inventory costs more and converts better.

Key Insight: In competitive verticals like insurance, legal, and SaaS, "Other" position traffic can carry 3–5x lower conversion rates than "Top" position traffic. If you're seeing mostly "Other" impressions with a high CPA, your reported CPA is artificially inflated by low-intent traffic — not a reflection of what a properly-bid campaign would achieve.

If 80% or more of your traffic is coming from "Other" positions on bottom-funnel terms and your conversion rate is low, that's your signal. Raising bids — or setting a more realistic Smart Bidding target — shifts you into the inventory that actually performs. For a fuller look at how to set opening bids on new campaigns, the same logic about auction position applies from day one.

---

How does Smart Bidding underbid, and how do you fix it?

When running Maximize Conversions, Maximize Conversion Value, or those strategies with a Target CPA or Target ROAS constraint, the algorithm throttles spend in auctions it believes won't meet your targets — so "bidding too low" on Smart Bidding is not about a Max CPC setting, it's about targets that are too aggressive for current market conditions. [2]

How to diagnose Smart Bidding throttling

Common Mistake: Setting a Target CPA 50% below your historical average on day one, expecting the algorithm to find a way. Smart Bidding needs realistic targets to function — start at or slightly above your actual historical CPA, then work the target down gradually once the algorithm has sufficient data. I tested the cost of setting targets too aggressively in a structured experiment; for a detailed breakdown, see this $20,000 Smart Bidding test.
Best Practice: When launching Smart Bidding campaigns without historical conversion data, start with Maximize Conversions (no target) for the first 30–60 days and accumulate at least 30–50 conversions before adding a Target CPA or Target ROAS constraint. This gives the algorithm the learning signal it needs to bid effectively across the auction. [5]
---

When is raising bids the wrong answer — and what should you fix instead?

If your Quality Score is the root problem, raising bids is expensive and temporary: a keyword at Quality Score 3/10 requires roughly double or triple the bid of a 7/10 keyword to reach the same Ad Rank, meaning you're paying a permanent tax on every auction. [1] Fix the structural issue first.

Quick Quality Score audit

  1. Filter your keywords to Quality Score <5.
  2. Check the three sub-components: Expected CTR, Ad Relevance, Landing Page Experience. [4]
  3. If Expected CTR is Below Average — rewrite your ad headlines. The ad copy isn't compelling enough for that query.
  4. If Ad Relevance is Below Average — restructure into tighter ad groups so keywords and ads align more closely.
  5. If Landing Page Experience is Below Average — improve page content, load speed, or mobile usability. No bid increase overcomes a poor landing page.

In most competitive verticals, an average Quality Score of 6–8 across active keywords puts you in a position where bid increases have real leverage. Below a 5 average, the Quality Score issues should be addressed first — you'll get more impression share per dollar spent. For a broader diagnostic covering bid strategy, Quality Score, and structure together, the 250-point Google Ads audit engine surfaces these issues automatically.

---

What to do next

  1. Add Lost IS (Rank) to your campaign view today. Sort descending. Any campaign above 30% Lost IS (Rank) is your first intervention target. Confirm that Lost IS (Budget) is not the dominant cause before touching bids.
  2. Pull the Auction Insights report for your top three campaigns. Identify which competitors appear above you consistently and at what rates. Cross-reference their ad copy and landing pages for free competitive intelligence.
  3. Run a keyword-level bid estimate audit. Export your keywords with the Est. First Page Bid column. Flag every keyword where your Max CPC is more than 30% below the estimate and the keyword has at least one conversion in the last 30 days. These are your priority bid-increase candidates.
  4. Segment performance by Top vs. Other. If more than 50% of conversions on bottom-funnel keywords are coming from "Other" positions, calculate the CPA differential to quantify what you're leaving on the table.
  5. If running Smart Bidding, audit your target vs. trailing 30-day actual CPA. If your Target CPA is more than 20% below your actual CPA, raise the target by 10% at a time, every 7–14 days, and log each change so you can correlate it with performance shifts. For ongoing monitoring, Buddy, the AI Google Ads agent, tracks these gaps automatically.
---

Frequently asked questions

How long should I wait after raising bids before judging the impact?

Allow at least 7–14 days after a bid increase before drawing conclusions, and 2–4 weeks if you're running Smart Bidding. The algorithm needs time to re-enter the learning phase and explore the new auction range. Making additional changes during that window resets the learning period and makes it harder to attribute performance shifts to any single change.

Can I be bidding too low on some devices but not others?

Yes. Desktop and mobile auctions have different competitive dynamics and clearing prices. Run your Auction Insights and Top vs. Other segment broken out by device. If mobile shows dramatically lower Top position rates and higher Lost IS (Rank), a positive mobile bid adjustment — applied as a percentage on top of your base bid — can close the gap without changing your overall bid strategy.

Does a low Quality Score mean I should definitely not raise bids?

Not categorically, but raising bids on a low-Quality Score keyword is expensive. A keyword at 3/10 needs roughly twice the bid of a 7/10 keyword to achieve the same Ad Rank, so you're paying a large premium. Fix Expected CTR through better ad copy, Ad Relevance through tighter ad group structure, and Landing Page Experience through page improvements first — then raise bids once Quality Score improves. [4]

What is the right starting Target CPA for a new Smart Bidding campaign?

If you have historical conversion data, start at your actual 30-day average CPA or 10–15% above it, then lower the target gradually over time. If you have no history, start with Maximize Conversions (without a target) until you accumulate 30–50 conversions. Setting an aggressive target on day one causes the algorithm to throttle impressions heavily while chasing an unachievable number. [3]

Is impression share loss always a bidding problem?

No — Lost IS (Budget) and Lost IS (Rank) are separate. If the majority of your impression share loss is budget-driven, raising bids will spend your daily budget faster on fewer clicks and make performance worse. Always check both columns together. Only if Lost IS (Rank) is the dominant figure should you treat it as a bidding problem rather than a budget allocation issue.

Where can I find more answers on bidding strategy in Google Ads?

The full bidding & Smart Bidding answer library covers related topics including waterfall structures, competitive keyword bidding, and how Google's auction prices top-of-page placements — all written from practitioner experience across a wide range of account types and spend levels.

References

  1. Google Ads Help. “About Ad Rank.” Accessed Nov 11, 2026.
  2. Google Ads Help. “About Smart Bidding.” Accessed Nov 11, 2026.
  3. Google Ads Help. “About Target CPA bidding.” Accessed Nov 11, 2026.
  4. Google Ads Help. “About Quality Score for Search campaigns.” Accessed Nov 11, 2026.
  5. Google Ads Help. “Determine a bid strategy based on your goals.” Accessed Nov 11, 2026.
  6. Original community discussion: r/googleads thread on Reddit.

Related Reading

AI Disclosure: This article was generated with AI assistance based on a community discussion on Reddit r/googleads. Expert analysis and practitioner perspective by John Williams, Founder, AHMEEGO · Google Ads Practitioner with $350M+ in managed Google Ads spend. AI was used to draft and structure the content; all strategic recommendations reflect real campaign experience.