/ Blog
Home Blog Contact Buddy Ads Builder Audit Engine

Google Ads rep told me to ignore quality score

Google Ads Strategy

Your rep is half right. Quality Score is a diagnostic tool, not a target to worship — but ignoring it entirely will cost you real money. Quality Score directly affects Ad Rank and your actual CPC: low scores mean you pay more for worse positions. Use the three sub-component ratings (Expected CTR, Ad Relevance, Landing Page Experience) to find and fix root causes, not to chase a 10/10 number.

Key takeaways

  • Quality Score is a lagging diagnostic indicator — the sub-components (Expected CTR, Ad Relevance, Landing Page Experience) are the signals you actually act on.
  • A higher Quality Score directly lowers your CPC and improves Ad Rank, so ignoring it literally costs budget.
  • Low-volume keywords (under ~500 impressions/month) often show unreliable Quality Score data — that is the one case where the rep's advice holds.
  • Optimize in the right order: conversion volume and CPA/ROAS first, Quality Score second; never rebuild an account structure just to lift the score.
  • A monthly review cadence is enough — Quality Score is a ~90-day trailing signal, not a metric to monitor daily.
Key terms
Quality Score
Google's 1–10 rating of the expected quality of your ads, keywords, and landing pages relative to competing advertisers for the same keyword.
Ad Rank
The score Google calculates at each auction to determine your ad's position and actual CPC, using your bid, Quality Score, and expected impact of ad extensions.
Expected CTR
A Quality Score sub-component rating how likely your ad is to be clicked when shown for a given keyword, relative to other advertisers at the same position.
Landing Page Experience
A Quality Score sub-component rating how relevant, transparent, and fast your landing page is for users who click your ad.
Impression Share Lost to Rank
The percentage of eligible impressions you missed because your Ad Rank — influenced by Quality Score — was too low to win the auction.
---

What does Quality Score actually measure?

Quality Score is Google's 1–10 rating of the expected quality of your ads, keywords, and landing pages relative to other advertisers competing for the same keyword. [1] It is built from three sub-components, each rated Above Average, Average, or Below Average:

The composite 1–10 number is a snapshot of those three signals. This is why the sub-component columns — not the composite score — are where diagnostics actually start. This question came up directly in the r/PPC community thread, and the confusion is understandable: Google reps sometimes communicate the "it's diagnostic" message so bluntly that practitioners take it as permission to stop optimizing altogether.

Key Insight: Quality Score is a symptom reporter, not a root cause. Chasing the number without addressing CTR, relevance, and landing page experience is like shaking a thermometer because you don't like your temperature reading.
---

Does Quality Score actually affect what you pay?

Yes — Quality Score has a direct, mathematically provable impact on Ad Rank and Cost Per Click, which means ignoring the signals it surfaces will cause you to pay more for worse positions. [2] The Ad Rank formula works like this:

Ad Rank = Max CPC Bid × Quality Score × Expected Impact of Ad Extensions & Formats

Two advertisers bidding the same CPC can get dramatically different actual CPCs and positions based on Quality Score alone. [2] In accounts I manage, the real-world impact looks roughly like this:

Quality ScoreRelative CPC ImpactTypical Outcome
1–3Paying 50–400% more than competitorsPoor position, high CPA, ads may stop serving
4–6Near market rateAverage performance, room to improve
7–910–30% CPC discount vs. competitorsCompetitive positions at lower cost
10Maximum efficiencyBest positions at lowest possible CPC

In practice, I've taken accounts from average Quality Scores of 4–5 to 7–8 and seen CPCs drop 20–35% with no bid changes. That's budget back in your pocket. The CPC penalty for low Quality Scores is very much still real.

Common Mistake: Taking "ignore Quality Score" advice at face value and stopping all optimization on ad copy, keyword structure, and landing pages. The underlying signals Quality Score measures have direct auction consequences — ignoring the score means ignoring the factors driving your costs up or down.
---

When is the rep actually right to de-prioritize Quality Score?

There is one legitimate scenario where Quality Score data becomes genuinely unreliable: low-volume keywords. Google needs a statistically significant sample of impressions and clicks to assign accurate sub-ratings. [1] Keywords with fewer than a few hundred impressions in a rolling period often default to "Average" across all sub-components — not because performance is average, but because Google lacks enough data to say otherwise.

Focus your Quality Score optimization energy on keywords that meet all three criteria:

There is also a performance-override scenario: if a keyword has a Quality Score of 5–6 but is generating conversions at a CPA that beats everything else in the account, chasing Quality Score improvement at the expense of what's working is a mistake. The optimization hierarchy should always be conversion volume → CPA/ROAS → Quality Score. A low Quality Score paired with a high conversion rate is a real and valid state — the math determines whether optimization is worth the effort.

Best Practice: Run a monthly Quality Score audit segmented by spend tier. Focus optimization on your top 20% of keywords by spend that have Quality Scores below 7. Let low-spend, low-QS keywords ride unless they are causing broader account quality issues.
---

How do you use Quality Score sub-components as a diagnostic?

The most valuable analysis you can do is not reading the composite 1–10 number — it is drilling into the three sub-component ratings and understanding what each "Below Average" flag is telling you.

Below Average Expected CTR

Your ads are not compelling enough for the keyword, or the keyword is too broad and attracting irrelevant impressions that drag down your CTR signal. Audit your ad copy for specificity and review your search terms report for junk traffic. [3]

Below Average Ad Relevance

Your ad copy does not closely mirror the keyword's intent — a frequent sign that too many loosely related keywords are sharing one ad group. Tighten your ad groups and make sure your Responsive Search Ad headlines directly reference the keyword theme. For high-value terms, build dedicated ad groups with 3–5 tightly themed keywords.

Below Average Landing Page Experience

Google's crawlers and user behavior data indicate that visitors are not finding what they expected. Check mobile load speed (target under 3 seconds), message match between your ad headline and the page headline, and whether your page answers the query above the fold.

Best Practice: Export keyword-level Quality Score data with all three sub-component columns monthly. Filter to any keyword spending more than $200/month with a Quality Score below 6. Those are your highest-ROI optimization targets — the ones where improvement directly reduces cost per conversion.
---

How do you actually improve Quality Score?

Quality Score improvement follows a clear hierarchy: fix structure first, then copy, then landing page speed — in that order, because you cannot write your way out of a structural relevance problem.

1. Fix ad group structure first

Most Quality Score problems trace back to bloated ad groups with 20–50 keywords pointing to one generic ad. Build dedicated ad groups with 3–5 tightly themed keywords and write Responsive Search Ad (RSA) assets that directly reference those specific terms. Note: Expanded text ads can no longer be created or edited — RSAs are the only search ad format available for new creative.

2. Engineer message match across the full funnel

The keyword → ad → landing page chain must be unbroken. If someone searches "emergency HVAC repair Austin," your ad headline should contain those words, and the first thing they read on the landing page should confirm they are in the right place. Anything less than that tight alignment costs you on Landing Page Experience and, more importantly, costs you conversions. [4]

3. Lift CTR systematically

Expected CTR is calculated relative to other advertisers at the same position for the same keyword — your raw CTR improving is not enough if competitors are improving faster. Tactics that reliably lift CTR in accounts I manage:

4. Make landing page speed non-negotiable

Most landing pages I audit load in 4–8 seconds on mobile — well above the threshold where both Quality Score and conversion rate suffer. Run every page receiving paid traffic through Google PageSpeed Insights and target a mobile score of 70+. Quick wins:

Key Insight: Landing page speed improvements produce a double ROI — they improve your Quality Score (reducing CPCs) and your conversion rate (reducing CPA). A 1-second improvement in mobile load time can deliver more value than any bid optimization you run that month.
Common Mistake: Rebuilding entire account structures to chase Quality Score improvements on keywords that are not driving meaningful conversion volume. I have seen practitioners spend 40 hours restructuring campaigns to lift average Quality Score from 6.2 to 7.1 on keywords accounting for 8% of conversions. That same time spent on audience layering, bid strategy tuning, or creative testing would have delivered 5–10x the business impact.
---

What should you track alongside Quality Score?

Experienced practitioners use Quality Score as one signal inside a broader account health dashboard — not as the primary KPI. The metrics that tell a more complete story:

For a systematic view of these signals across your whole account, the 250-point Google Ads audit engine surfaces Quality Score issues alongside the structural and bidding factors that drive them.

---

What to do next

  1. Pull your Quality Score data today. Export all keywords with spend >$100/month in the last 30 days and include all three sub-component columns. Sort by Quality Score ascending — these are your priorities.
  2. Diagnose sub-components, not the composite score. For every keyword at 6 or below, identify which sub-component is flagged Below Average. That tells you exactly what to fix: ad copy (CTR or relevance) or landing page.
  3. Fix structure before copy. If multiple keyword themes share one ad group and you are seeing Below Average Ad Relevance, restructure first. Rewriting headlines will not solve a structural relevance problem.
  4. Run a landing page speed audit. Use Google PageSpeed Insights on every URL receiving paid traffic. Any mobile score below 60 is actively hurting you — prioritize pages attached to your highest-spend keywords.
  5. Set a monthly review cadence. Quality Score is a ~90-day trailing signal. Check it monthly as part of an account health review, make improvements, then move on. Daily monitoring leads to optimizing a number instead of optimizing to performance.

If you want a guided walkthrough of your account's Quality Score issues alongside 250 other diagnostic checks, Buddy, the AI Google Ads agent can run that audit for you in minutes.

---

Frequently asked questions

Does Quality Score affect Performance Max campaigns?

Quality Score as a reported 1–10 metric applies to Search keyword-based campaigns only. Performance Max does not expose keyword-level Quality Scores because it does not use traditional keyword targeting in the same way. [5] Focus Quality Score optimization on your Search campaigns; for PMax, asset group strength ratings serve a similar diagnostic purpose.

How long does it take for Quality Score to improve after making changes?

Quality Score is calculated on a rolling basis using recent impression and click data, weighted toward the past 90 days. In practice, meaningful changes to ad copy or landing pages can begin to show up in sub-component ratings within 2–4 weeks on keywords with sufficient volume. Low-volume keywords may take considerably longer to accumulate enough data to reflect improvements.

Is a Quality Score of 7 good enough, or should I always push for 10?

A Quality Score of 7 is genuinely good — it places you in the range where you receive a measurable CPC discount relative to average advertisers. What a 7/10 Quality Score means in practice depends on your competitive landscape, but chasing 10/10 on every keyword is rarely the highest-ROI use of optimization time. Focus incremental effort on keywords at 5 or below that carry meaningful spend.

Can a new campaign have an accurate Quality Score?

No — new campaigns and newly added keywords start with limited or no Quality Score data. Google assigns scores based on historical data for the keyword across all advertisers, but your account-specific sub-component ratings require your own impression and click history to become reliable. [1] Do not make major structural decisions based on Quality Score data in the first 30 days of a new keyword's life.

Does deleting and re-adding a keyword reset its Quality Score?

Deleting and re-adding a keyword does reset its account-level history for Quality Score purposes, but Google's auction-time quality evaluation draws on broader signals beyond your account history alone. In practice, this tactic does not reliably improve Quality Score and wastes the statistical history you have built. It is not a recommended optimization approach.

Does Quality Score matter if I'm using automated bidding?

Yes. Automated bid strategies — including Maximize Conversions and Maximize Conversion Value with or without a Target CPA or Target ROAS — still participate in the same Ad Rank auction where Quality Score determines your competitiveness and effective CPC. [6] Smart bidding optimizes bids within the auction; it does not compensate for a structurally low Quality Score. Understanding how Quality Score interacts with automated bidding remains important regardless of your bid strategy.

References

  1. Google Ads Help. “About Quality Score for Search campaigns.” Accessed Nov 8, 2026.
  2. Google Ads Help. “About Ad Rank.” Accessed Nov 8, 2026.
  3. Google Ads Help. “About the search terms report.” Accessed Nov 8, 2026.
  4. Wikipedia. “Conversion rate optimization.” Accessed Nov 8, 2026.
  5. Google Ads Help. “About Performance Max campaigns.” Accessed Nov 8, 2026.
  6. Google Ads Help. “Determine a bid strategy based on your goals.” Accessed Nov 8, 2026.
  7. Original community discussion: r/PPC thread on Reddit.

Related Reading

AI Disclosure: This article was generated with AI assistance based on a community discussion on Reddit r/PPC. Expert analysis and practitioner perspective by John Williams, Founder, AHMEEGO · Google Ads Practitioner with $350M+ in managed Google Ads spend. AI was used to draft and structure the content; all strategic recommendations reflect real campaign experience.